View HT82V805A_4462903.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rev. 1.00 1 december 16, 2011 rev. 1.00 pb december 16, 2011 HT82V805A ccd 4 channel vertical driver features ? input voltage: 3.0v~5.5v ? seven integrated circuits ? 2-level output: 2 circuits for vertical ccd clock driveroutput voltage level (typ.) = -8.5v to 0v. ? 3-level output: 2 circuits for vertical ccd clock driveroutput voltage level (typ.) = -8.5v to 15v. ? 2-level output: 1 circuits for shutter driver output voltage level (typ.) = -8.5v to 15v. ? switchable between ntsc(eia) and pal(ccir) modes ? 16-pin ssop, 16-pin tssop package general descriptions the ht82v805 a is a cmos vertical clock driver and shutter driver ic for ccd area sensors. it has the capability of converting the voltage and impedance from the cmos level. block diagram pin assignment

rev. 1.00 2 december 16, 2011 HT82V805A supply voltage ......................... v ss -0.3v to v l +3.5v input voltage ............................ v ss -0.3v to v h +0.3v storage temperature .......................... -55c to 150c operating temperature ........................ -25c to 70c pin description pin name i/o description vss D negative power supply, ground ofdx i electronic shutter pulse input v1x, v2x, v3x, v4x i vertical transfer pulse input vh1ax, vh3ax i pulse that transfers the charge of the photo-diode to the vertical shift register vh D power supply for high level of v1a, v3a v4 o pulse to drive vertical ccd shift register (2 level: vme, vl) v3a o pulse to drive vertical ccd shift register (3 level: vme, vl, vh) vme D power supply for intermediate level of v1a, v3a v1a o pulse to drive vertical ccd shift register (3 level: vme, vl, vh) v2 o pulse to drive vertical ccd shift register (2 level: vme, vl) vl D power supply for all low level output pulses pofd o electronic shutter pulse output (2 level: vl, vh) absolute maximum ratings note: these are stress ratings only. stresses exceeding the range specifed under absolute maximum ratings may cause substantial damage to the device. functional operation of this device at other conditions beyond those listed in the specifcation is not implied and prolonged exposure to extreme conditions may affect device reliability. recommended operating conditions symbol parameter value unit v h supply voltage -0.3 ~ v l +3.5 v v l 0 ~ -10 v vem v l -0.3 ~ 3.0 v v1a, v2, v3a, v4, pofd output voltage v l -0.3 ~ v h +0.3 v logic function table input output v1x, v3x vh1ax, vh3ax v2x, v4x ofdx v1a,v3a v2, v4 pofd l l D D vh D D l l D D z D D h h D D vme D D h h D D vl D D D D l D D D D D D h D D vme D D D D D D vl D D D D l D D vh D D D h D D vl
rev. 1.00 3 december 16, 2011 HT82V805A d.c. characteristics v h = 15v, v me = 0v, v l = -8.5v, ta= 25 c symbol parameter test conditions min. typ. max. unit v dd logic supply voltage D 3.0 3.3 5.5 v v h supply voltage D 14.5 15.0 15.5 v v l D -9.5 -8.5 -7.5 v v ih high level input voltage D 2.3 D D v v il low level input voltage D D D 1.2 v i vh operating current shutter speed = 100khz D 2.9 D ma i vl D -1.7 D ma i ol output current v1a, v2, v3a, v4 = -8.0v D 31.5 D ma i om1 v1a, v2, v3a, v4 = -0.5v D -8.5 D ma i om2 v1a, v3a = 0.5v D 8.5 D ma i oh v1a, v3a = 14.5v D -10 D ma i osl ofdx = -8.0v D 18.5 D ma i osh pofd = 14.5v D -8.0 D ma a.c. characteristics v h = 15v, v me = 0v, v l = -8.5v, ta = 25 c symbol parameter test conditions min. typ. max. unit t plm delay time D D 70 D ns t pmh D D 70 D ns t plh D D 70 D ns t pml D D 70 D ns t phm D D 70 D ns t phl D D 70 D ns t tlm rising time D D 800 D ns t tmh D D 1000 D ns t tlh D D 320 D ns t tml D D 900 D ns t thm D D 1400 D ns t thl D D 220 D ns
rev. 1.00 4 december 16, 2011 HT82V805A timing diagram

test circuits pofd v 1 a v 2 v 4 v 3 a r 4 c 41 c 23 c 34 c 3 c 4 c 2 c 1 c 12 r 3 r 1 r 2 r g csub note: r1 to r4=27 w rg=5 w c1 to c4=3300pf c12, c23, c34, c41=1500pf csub=500pf
rev. 1.00 5 december 16, 2011 HT82V805A application circuits + timing generator xs u b xv 2 xv 1 xsg1 xv 3 xsg3 xv 4 j4 ccd vsub v2 v1 v3 v4 vee (-8.5v) HT82V805A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 vss ofdx v2x v1x vh1ax v3x vh3ax v4x v4 v3a vme v1a v2 vl pofd vh 1uf 0.1uf vhh (15v)
rev. 1.00 6 december 16, 2011 HT82V805A package information note that the package information provided here is for consultation purposes only. as this information may be updated at regular intervals users are reminded to consult the holtek website (http://www.holtek.com.tw/english/ literature/package.pdf) for the latest version of the package information. 16-pin ssop (150mil) outline dimensions 16-pin ssop (150mil) symbol dimensions in inch min. nom. max. a 0.228 D 0.244 b 0.150 D 0.157 c 0.008 D 0.012 c' 0.189 D 0.197 d 0.054 D 0.060 e D 0.025 D f 0.004 D 0.010 g 0.022 D 0.028 h 0.007 D 0.010 0 D 8 symbol dimensions in mm min. nom. max. a 5.79 D 6.20 b 3.81 D 3.99 c 0.20 D 0.30 c' 4.80 D 5.00 d 1.37 D 1.52 e D 0.64 D f 0.10 D 0.25 g 0.56 D 0.71 h 0.18 D 0.25 0 D 8
rev. 1.00 7 december 16, 2011 HT82V805A 16-pin tssop outline dimensions
16-pin tssop symbol dimensions in inch min. nom. max. a 0.039 D 0.041 a1 0.002 D 0.006 a2 0.041 D 0.047 b D 0.010 D c 0.004 D 0.006 d 0.193 D 0.201 e 0.244 D 0.260 e1 0.169 D 0.177 e D 0.026 D l 0.020 D 0.028 y D D 0.003 0 D 8 symbol dimensions in inch min. nom. max. a 1.00 D 1.05 a1 0.05 D 0.15 a2 1.05 D 1.20 b D 0.25 D c 0.11 D 0.15 d 4.90 D 5.10 e 6.20 D 6.60 e1 4.30 D 4.50 e D 0.65 D l 0.50 D 0.70 y D D 0.076 0 D 8
rev. 1.00 8 december 16, 2011 HT82V805A reel dimensions 16-pin ssop symbol description dimensions in mm a reel outer diameter 330.01.0 b reel inner diameter 100.01.5 c spindle hole diameter 13.0 +0.5/-0.2 d key slit width 2.00.5 t1 space between flange 12.8 +0.3/-0.2 t2 reel thickness 18.20.2 16-pin tssop symbol description dimensions in mm a reel outer diameter 330.01.0 b reel inner diameter 100.01.5 c spindle hole diameter 13.0 +0.5/-0.2 d key slit width 2.00.5 t1 space between flange 16.8 +0.3/-0.2 t2 reel thickness 22.20.2
rev. 1.00 9 december 16, 2011 HT82V805A carrier tape dimensions

16-pin ssop symbol description dimensions in mm w carrier tape width 12.0 +0.3/-0.1 p cavity pitch 8.00.1 e perforation position 1.750.10 f cavity to perforation (width direction) 5.50.1 d perforation diameter 1.550.10 d1 cavity hole diameter 1.50 +0.25/-0.00 p0 perforation pitch 4.00.1 p1 cavity to perforation (length direction) 2.00.1 a0 cavity length 6.40.1 b0 cavity width 5.20.1 k0 cavity depth 2.10.1 t carrier tape thickness 0.300.05 c cover tape width 9.30.1 16-pin tssop symbol description dimensions in mm w carrier tape width 16.0 +0.3/-0.1 p cavity pitch 8.00.1 e perforation position 1.750.10 f cavity to perforation (width direction) 7.50.5 d perforation diameter 1.5 +0.1/-0.0 d1 cavity hole diameter 1.5 +0.1/-0.0 p0 perforation pitch 4.00.1 p1 cavity to perforation (length direction) 2.00.1 a0 cavity length 6.80.1 b0 cavity width 5.40.1 k0 cavity depth 1.60.1 t carrier tape thickness 0.3000.013 c cover tape width 13.30.1
rev. 1.00 10 december 16, 2011 HT82V805A holtek semiconductor inc. (headquarters) no.3, creation rd. ii, science park, hsinchu, taiwan tel: 886-3-563-1999 fax: 886-3-563-1189 http://www.holtek.com.tw holtek semiconductor inc. (taipei sales offce) 4f-2, no. 3-2, yuanqu st., nankang software park, taipei 115, taiwan tel: 886-2-2655-7070 fax: 886-2-2655-7373 fax: 886-2-2655-7383 (international sales hotline) holtek semiconductor inc. (shenzhen sales offce) 5f, unit a, productivity building, no.5 gaoxin m 2nd road, nanshan district, shenzhen, china 518057 tel: 86-755-8616-9908, 86-755-8616-9308 fax: 86-755-8616-9722 holtek semiconductor (usa), inc. (north america sales offce) 46729 fremont blvd., fremont, ca 94538, usa tel: 1-510-252-9880 fax: 1-510-252-9885 http://www.holtek.com copyright ? 2011 by holtek semiconductor inc. the information appearing in this data sheet is believed to be accurate at the time of publication. however, holtek assumes no responsibility arising from the use of the specifications described. the applications mentioned herein are used solely for the purpose of illustration and holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. holtek's products are not authorized for use as critical components in life support devices or systems. holtek reserves the right to alter its products without prior notifcation. for the most up-to-date information, please visit our web site at http://www.holtek.com.tw.

▲Up To Search▲

Price & Availability of HT82V805A

	To Download HT82V805A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .